Many amateur radio transceivers allow users to set up memory channels to store their favorite simplex frequencies or repeater information including frequency (such as repeater name, frequncy, offset, tones and more).
Programming memory channels using the radio’s keypad can often be incredibly cumbersome and time consuming.
Using factory or homebrew programming cables can speed up the process but often introduces other issues (on top of the cost of having to purchase a programming cable for each radio). Topping the list of those issues are usually driver problems that prevent the computer from being able to use the cable. This method also means either having to take your radios to a computer or bringing the computer to your radios.
The project outlined in the document below will describe how to make a portable “universal” ham radio transceiver programmer. The total cost of the project is around $40-50 (much less if you use parts you already have) and will yield a programmer that is approximately the size of a deck of cards, weighs only a few ounces and includes the computer and the cables you need to program your radio. This programmer (perfect for travelers, emergencies and more) will connect to any display with HDMI or RCA video inputs and is powered by a standard USB power outlet, computer port or cell phone charger.
Build one today and keep it with your ham radio gear so you can program your radios on the go!
To build the programmer, you’ll need:
To set up and use the programmer, you’ll need: